Pool Heat Evaluation Sample

Pool Type

Is the pool indoor or outdoor?*

Indoor
Outdoor

- Indoor pool room length*
- Indoor pool room width*
- Indoor pool room height*
Pool room construction:*
- well insulated
- Normal brick veneer etc
If your indoor pool room is a bare metal shed please complete the online evaluation form using the outdoor pool option with 100% shade and sheltered from the wind.
Does the room have heating?*
- No
- Yes
- Heating Set Point:
- Heating Set Point In Use*
- Heating Set Point Not In Use*
- Months room heater is used:*
  - All months
  - January
  - February
  - March
  - April
  - May
  - June
  - July
  - August
  - September
  - October
  - November
  - December
- Does the room have an exhaust fan?*
  - No
  - Yes
- - Minimum Ventilation Rate Per Hour*
  - Maximum Ventilation Rate Per Hour*
- Does the room have a dehumidifier?*
  - No
  - Yes
- - In Use % Relative Humidity*
  - Not In Use % Relative Humidity*

- Is there any shading on the pool?*
  - Never Shaded
  - Minor Shading (25%)
  - Major Shading (50%)
  - User Defined Shading
- - Jan/Dec ( Percent % )
  - Feb/Nov ( Percent % )
  - Mar/Oct ( Percent % )
  - Apr/Sep ( Percent % )
  - May/Aug ( Percent % )
  - Jun/Jul( Percent % )
Is the pool affected by wind?*
- Sheltered
- Normal Suburban
- High Wind

What temperature would you like the pool to maintain?*

I.E. Pool owners usually heat their pool to 26°C to 32°C. Lap swimmers/exercising typically heat at 24°C, resorts typically heat at 26-27°C, people who feel the cold typically heat at 30°C, learn to swim pools typically heat at 32-33°C.

Does the pool have an existing heating system?*
- No
- Yes
- Heating System*
  - Gas
  - Electric Element
  - Solar

Solar collector surface area:*

Enter m2 number

Solar collector inclination/angle:*

Enter degrees number

Solar collector direction/facing:*

Solar Collector Type:*

Solar system set temperature:**

Enter degrees number

To estimate your pool heating running costs EvoHeat need to confirm your energy costs. Please select and complete one of the options below:

Energy Costs*

If you are unsure of your general tariff rate below is a general tariff after discount guide. Please note: this is a rough guide only, for your accurate general tariff rate please refer to your energy bill. QLD: 24c per k/W, NSW: 25c per k/W, VIC: 26.6c per k/W, ACT: 22c per k/W, SA: 35c per k/W, WA: 25c per K/W, TAS: 30c per k/W

General Tariff
Time of Use
Unsure – Please Use Average General Tariff Rate For My State

Electricity - general tariff*

Tariff - cents/kWh
Off peak*
Peak*
Shoulder*

- Weekdays
- From
- To
- Off Peak
- Tariff Weekday Off Peak From*
- Tariff Weekday Off Peak To*
- Peak
- Tariff Weekday Peak From*
- Tariff Weekday Peak To*
- Shoulder
- Tariff Weekday Shoulder From*
- Tariff Weekday Shoulder To*
- Peak
- Tariff Weekday Peak 2 From*
- Tariff Weekday Peak 2 To*
- Shoulder
- Tariff Weekday Shoulder 2 From*
- Tariff Weekday Shoulder 2 To*
- Off Peak
- Tariff Weekday Off Peak 2 From*
- Tariff Weekday Shoulder 2 To*

- Weekends
- From
- To
- Off Peak
- Tariff Weekend Off Peak From*
- Tariff Weekend Off Peak To*
- Peak
- Tariff Weekend Peak From*
- Tariff Weekend Peak To*
- Off Peak
- Tariff Weekend Off Peak 2 From*
- Tariff Weekend Off Peak 2 To*
- Peak
- Tariff Weekend Peak 2 From*
- Tariff Weekend Peak 2 To*
- Off Peak
- Tariff Weekend Off Peak 3 From*
- Tariff Weekend Off Peak 3 To*

Cents per k/W

Please note: this is a rough guide only, for your accurate general tariff rate please refer to your energy bill.

Select the hours the heat pump can operate (24 hours):*

24 Hours
Day/Evening (7AM to 10PM)

Select Time On:*

: HH

MM

Select Time Off:*

: HH

MM

Select the months you would like to swim in the pool*

Do you have a spa connected to the pool by the same filtration/spillover system?*
- No
- Yes
- Length*
- Width*
- Depth*

Do you have a separate spa pool that you wish to heat?*
- No
- Yes
- Length*
- Width*
- Depth*
Water temparature Required for this spa?*

Pool Heat Evaluation Sample

Personal Information

Pool Information

Pool Type

Default Fields