GS SERIESpool and spa heaters

GS SERIES

DOMESTIC AND COMMERICAL WATER AND SPACE HEATING/COOLING

The GS series of ground source heat pumps are ideally suited to areas where the subterranean water table temperature is higher than the average air temperature.

GROUND SOURCE HEAT PUMP

The GS series use water sourced from bores drilled into the ground to circulate water through the unit. Water system can either be an open or closed loop. As subterranean water maintains a constant temperature that is often warmer than ambient air temperatures, the GS system is particularly effective in colder climates or locations. The GS Series can also be connected to water sources such as streams, rivers, lakes, ponds and even the ocean if the water source is close by. It’s possible to install and run a GS Series heat pump anywhere in Australia from lake side hotel, to inner city Melbourne, to a Thredbo resort.

APPLICATIONS

The GS Series is ideal for domestic and commercial water and space heating and cooling applications, including residential properties, hotels and resorts.

  • Reverse cycle
  • Small and compact
  • Cheap to run
  • Robust and reliable
  • Flexible installation
  • Ozone friendly R-410a refrigerant

GROUND SOURCE HEAT PUMP

FLEXIBLE INSTALLATION

With flexible installation option, you can run the GS unit using a nearby water source such as a lake or river. Alternately, you can use conventional plumbing.

REVERSE CYCLE

The GS series features reverse cycle for both heating and cooling!

SMALL & COMPACT

Once installed, the GS Series hydronic heating system looks the same as any other heating or cooling system, using regular ducting, radiators or coils and thermostat controls.

CHEAP TO RUN

The installation costs are slightly higher than other systems however the GS Series pays for itself many times over during its lifetime. Expect savings of up to 80% off on your energy bills for underfloor heating and water heating.

ROBUST & RELIABLE

This series comes with commercial grade controls and compressor system, using the same robust control and compressor system as our commercial CHV. It also comes with 3 inbuilt Wilo water pumps for groundwater supply loop and 2 other heating/cooling applications.

BUILT TO LAST

The GS Series is built to last with a fully galvanized powder-coated steel frame.

MODELGS15GS17
Heating CapacitykW15.017.0
Cooling CapacitykW13.015.0
Heating Power InputkW3.03.4
Cooling Power InputkW3.33.8
Heating Running CurrentA5.46.1
Cooling Running CurrentA5.96.8
Power SupplyV/Ph/Hz410/2/50410/3/50
Compressor Type

Number

Scroll

1

Scroll

1

Heating Source Type

Water Flow Volume

Water Pressure Drop

Water Connection (Input)

Pump Power Input

Water Heat

m³/h

kPh

-

kW

m

Plate

3.3

14.5

1

0.2

5

Plate

3.7

16

1

0.2

5

Using Wide Type

Water Flow Volume

Water Pressure Drop

Water Connection (Input)

Pump Power Input

Water Heat

m³/h

kPh

-

kW

m

Plate

2.4

21

1

0.2

6

Plate

2.7

25

1

0.2

6

NoisedB(A)4242
Min/Max Operating Air Temp°C5°C to 40°C5°C to 40°C
Min/Max Operating Water Temp°C7°C to 55°C7°C to 55°C
Unit Weightkg150152
Shipping Weightkg165167

Heating: Using Side Water Temp. (In/Out): 30°C/35°C. Heat Source Water temp. (in/Out): 0°C / - . Cooling: Using Side Water Temp. (In/Out): 12°C/7°C, Heat Source Water temp. (In/Out): 25°C/30°C

SAVINGS TO EXPECT

The installation costs are slightly higher than other systems however the GS Series pays for itself many times over during its lifetime. Expect savings of up to 80% off on your energy bills for underfloor heating and water heating.

WARRANTY, PARTS & SERVICE

SeriesPartsOn-site labour
GS Series2 years1 year

For further peace of mind EvoHeat offer a 2-year warranty on parts and 1 year on site labour.

EvoHeat have a comprehensive network of specialist service agents nationally to ensure maximum equipment uptime. Spare parts are kept in stock in the extremely unlikely event that they are required.

...
FREE POOL HEATING

EVALUATION

+ EVALUATION FORM